1300 302 123[email protected]
Your Journey Starts Here! Enrol in our Courses.

MAR30824 Certificate III in Maritime Operations MED 2

The First Step For Your Maritime Career

A prerequisite for employment aboard a commercial vessel, plus a course which can also be undertaken which is the Marine Engineering course. This course will equip you with the knowledge needed to operate safely aboard a vessel.

Study now, pay later badge for MAST NSW maritime courses

This course is tailored for individuals aiming to become proficient Marine Engine Drivers in near coastal waters. It offers a blend of theoretical knowledge and hands-on experience, ensuring participants are well-equipped to operate and maintain marine engines safely and efficiently.

This course is designed for students who have achieved 80% of the AMSA (Australian Maritime Safety Authority) sea time requirements for Marine Engine Driver Grade 2 NC Certificate of Competency.

Marine Engine Fundamentals: Introduction to the principles of marine engine operation, including diesel and petrol engines.
Maintenance and Troubleshooting: Techniques for routine maintenance, diagnostics, and troubleshooting common engine issues.
Safety Protocols: Comprehensive training on safety procedures specific to engine rooms, including fire prevention and emergency response.
Electrical Systems: Basics of marine electrical systems, including battery management, circuitry, and fault detection.
Fuel Systems Management: Understanding and managing fuel systems, including fuel types, storage, and efficient consumption.
Propulsion Systems: Overview of various propulsion systems, their components, and maintenance requirements.
Environmental Stewardship: Best practices for minimising environmental impact, including waste management and pollution control.
Legislation and Compliance: Familiarisation with maritime regulations, standards, and compliance requirements for engine operations.
BSBTWK201
Work effectively with others
HLTAID011
Provide First Aid
MARB031
Maintain marine internal combustion engines, propulsion plant and auxiliary systems
MARB032
Undertake basic maintenance of electrical systems
MARC033
Complete engine room tasks
MARC034
Maintain hull out of water
MARC035
Operate and maintain extra low and low voltage electrical systems and equipment
MARC036
Operate deck machinery
MARC039
Operate marine internal combustion engines, and propulsion and auxiliary systems
MARC040
Manage fuel systems
MARC041
Operate and monitor marine internal combustion engines, propulsion plant and auxiliary systems
MARC042
Operate electrical systems
MARF060
Apply basic survival skills in the event of vessel abandonment
MARF028
Follow procedures to minimise and fight fires on board a vessel
MARF029
Meet work health and safety requirements
MARF030
Survive at sea using survival craft
MARJ006
Follow environmental work practices

Entry Requirements:

To ensure you have the right skills and support to succeed in your course, a Language, Literacy, and Numeracy (LLN) evaluation helps identify any areas where you may require additional support to help you achieve your goals.

You will also be required to hold at least 80% of the AMSA sea service requirements. Refer to the MED2 Entry Requirements Info Sheet for further details on sea service requirements and submitting evidence.

Due to the physical requirements of this qualification, the Learner must be physically fit.Please see the following PDF to check if this course is right for you and you meet the eligibility requirements:

MAR30824 – Certificate III in Maritime Operations (MED 2)

This qualification applies to people working in maritime industry seeking an Australian Maritime Safety Authority (AMSA) certificate of competency in the capacity of:

  • Chief engineer on vessels with an inboard engine with propulsion power <750 kW within the exclusive economic zone (EEZ) or
  • Second engineer on vessels with an inboard engine with propulsion power <1500 kW within the EEZ or
  • Chief or second engineer on vessels with an outboard engine with unlimited propulsion power within the EEZ or
  • Assistant under direct supervision of a chief engineer or
  • Worker in an engine room of a vessel <80 m long with propulsion power <3000 kW.

Previous Studies
MAR10224 General Purpose Hand Near Coastal

Further Studies

MAR20324 Coxswain Grade 1 Near Coastal

MAR40324 Master up to 45 Metres Near Coastal

Offered self-paced online learning. See ‘Enrol Now’ for further information. At Maritime & Safety Training, we deliver a blended learning model that combines the convenience of self-paced online study with the practical advantages of face-to-face training blocks.

Our online learning allows you to work through theory at your own pace, anywhere and anytime, while our in-person sessions focus on the hands-on skills, assessments, and real-world application required in the maritime and aquaculture industries.

This approach ensures you gain both the knowledge and the practical competency needed to succeed, without disrupting your work or lifestyle.

This qualification is required to obtain an AMSA certification as a Marine Engine Driver Grade 2 Near Coastal NC as defined in the National Standard for Commercial Vessels (NSCV) Part D.

AMSA certification will require:

  • achieving MAR30824 Certificate III in Maritime Operations (Marine Engine Driver Grade 2 NC)
  • sea service consisting of:
    • 180 days qualifying sea service and a completed AMSA approved task book
    • or 360 days qualifying sea service
    • or 120 days qualifying sea service and a completed AMSA approved task book, while holding a Coxswain 1 (Cox 1), Coxswain 2 endorsed for 500 kW inboard propulsion (Cox 2 500 kW), or Marine Engine Driver Grade 3 (MED 3)
    • or 240 days qualifying sea service while holding a Cox 1, Cox 2 500 kW or MED 3
    • or 90 days qualifying sea service and a completed AMSA approved task book while holding a workshop skill equivalent qualification
    • or 180 days qualifying sea service while holding a workshop skill equivalent qualification
  • meeting the medical and eyesight requirements specified in the NSCV Part D
  • assessment by an AMSA approved assessor using the AMSA mandated practical assessment (AMPA)

This is an accredited course.

HLTAID011
Provide First Aid
MARB053
Assist with routine maintenance on a commercial vessel
MARF060
Apply basic survival skills in the event of vessel abandonment
MARF028
Follow procedures to minimise and fight fires on board a vessel
MARF029
Meet work health and safety requirements
MARF030
Survive at sea using survival craft
MARG012
Work as part of a crew on a commercial vessel
MARN016
Apply general purpose hand skills aboard a commercial vessel
Price (AUD)
$3300

An ESS Course is also required if students do not already hold those qualifications

Upcoming Practical Assessment (AMPA Dates

8th September

6th October

10th November

Enrol Now

Start Your Maritime Career with Confidence

Whether you’re entering the maritime industry or advancing your qualifications, our expert trainers and industry-recognised courses will prepare you for success.
Enquire Now

Common Career Opportunities

  • Marine engine driver maintaining a vessel propulsion unit

    Marine Engine Driver

    Run and maintain the engines on commercial vessels. You’ll keep the engine room in order, spot problems early and keep the boat moving safely.

  • Fishing fleet engineer working in a trawler engine room

    Fishing Fleet Engineer

    Keep the engines running on commercial fishing vessels. Long days, hands-on work, and a crew that relies on you to get them home.

  • Tug and workboat engineer servicing a marine engine

    Tug and Workboat Engineer

    Look after the engine room on tugs, barges and workboats. Harbour work, towage and marine construction all need engineers who know their gear.

  • Ferry and passenger vessel engineer in the engine room

    Ferry and Passenger Vessel Engineer

    Maintain the engines on ferries and passenger boats. Set routes, regular hours and a job that keeps a service running day in, day out.

TESTIMONIALS

What Our Students Are Saying

From Coxswain to Certificate III graduates, discover why maritime professionals choose us for quality training and real-world experience.

Google review avatar for Kayde Botham

Great people working here, great deal for what your getting definitely should check it out

Kayde Botham
Student
Google review avatar for Ellen Wheatley

Very clear and easy to understand the rules and safety around boating and PWC. Highly recommend.

Ellen Wheatley
Student
Google review avatar for DM

Great courses and a great team.
I highly recommend to do your marine training here.
I also have to say all the stuff is super helpful and friendly.

DM
Student
Google review avatar for Cameron Burns

MAST provided a clear and memorable training experience across multiple courses.

Cameron Burns
Student
Google review avatar for D

Great session today with Jim. Learned a lot and still more to learn. Feel much more confident thanks to the session today. Hawkesbury river training has to be one of the best locations.

D
Student
Google review avatar for Anthony Gordon

Great day pulling engines apart! Thanks JP for the knowledge!

Anthony Gordon
Student
Google review avatar for Bryce Watson

Great training and highly recommended. Relax environment and the facilitators are very good and you learn all that is needed to feel confident boating.

Bryce Watson
Student
Google review avatar for Brendhan Bennison

What a great organisation. Clear, concise, and well thought out. Had a great experience with my course. The instructors are very approachable and were always available to help. Couldn’t recommend more.

Brendhan Bennison
Student
Google review avatar for Scott Ellam

After completing both MED II and MC24 over 7 weeks full time I would highly recommend MAST. Hopefully face to face in class teaching will be back to normal soon.

Scott Ellam
Student
Google review avatar for Kevin Reid

The course was well-organised, and Matthew, the instructor was experienced, knowledgeable and friendly. He explained everything clearly, making things easy to understand and giving helpful suggestions for passing the boat license test.

Kevin Reid
Student
FAqs

Frequently Asked Questions

Answers to the questions we hear most about our courses, enrolment and training. Can't find what you need? Get in touch and the team will help.